Medical devices made to fit the patient
From patient anatomy to a physical product with SLS 3D printing. We produce individually adapted medical devices and anatomical models using industrial SLS 3D printing technology. We convert complex geometry from a digital 3D model into a physical product, adapted to the anatomy and requirements of the specific medical application.
Every patient is different. Every part can be too.
Made to anatomy
We produce individualized medical devices based on the anatomy of each patient and the requirements of the specific procedure.
Anatomical models for planning
Anatomical models from medical imaging data provide a physical representation of anatomy and help with planning and preparing for a surgical procedure.
Biocompatible material and controlled process
We produce medical devices from biocompatible material in a controlled and certified production process.
What we produce with SLS 3D printing for medical
With industrial SLS technology we produce anatomical models, individualized medical devices, surgical guides and functional components for medical devices. Production takes place in a certified process, and for medical applications we use biocompatible material. Material and process suitability are determined based on the intended use and the requirements of each application.
Anatomical models
Individualized anatomical models from medical imaging data for visualizing anatomy, planning surgical procedures, education and communication.
Individualized medical devices
Medical devices produced according to the anatomy of each patient and the requirements of the specific medical or surgical application.
Medical device components
Functional parts, housings, brackets and other complex components for the development and production of medical devices and equipment.
Surgical guides and templates
Individualized surgical guides and positioning templates, adapted to the anatomy of each patient and the planned surgical procedure.
Production tailored to the patient
From a digital 3D model to an individual physical product, adapted to the anatomy and requirements of each case.
PA 2200 for precision and biocompatibility, PA 3200 GF for load-bearing parts
PA 2200 gives strong, precise parts with a smooth, cleanable surface, and its biocompatibility makes it a common choice for medical applications. We use PA 3200 GF for rigid load-bearing parts inside devices, where extra stiffness matters more than direct patient contact. Material certification requirements are agreed in advance.
PA 2200
High strength, chemical resistance, dimensional stability and biocompatibility. The most commonly used material for functional parts.
- Tensile strength 48 MPa
- Elongation 18 %
- HDT 157 °C
PA 3200 GF
High stiffness, wear and temperature resistance - with the repeatability of industrial printing.
- Tensile strength 51 MPa
- Elongation 9 %
- HDT 157 °C
From CT scan to anatomical model
We convert patient data captured through CT scanning into a usable 3D model and print it in biocompatible material with an SLS 3D printer. With no tooling required, we can adjust and reprint the model as needed, until the fit is exactly right.
Frequently asked questions about SLS 3D printing for medical
We use SLS 3D printing to produce individualized medical devices, surgical guides, anatomical models and medical device components. Medical devices are produced in a certified process using biocompatible material, with the material and process determined by the intended use.
Send a CAD model and get a quote for SLS 3D printing
Need a functional prototype, a technical component or a small batch? Upload your 3D CAD model and describe the project requirements. Our engineers will check feasibility, advise on material selection and prepare a quote.